The story of the Fluted Float
- Phil Arnott
- Chub
- Posts: 1004
- Joined: Wed Oct 09, 2013 2:21 pm
- 10
- Location: East Yorkshire
Re: The story of the Fluted Float
Using a loaded float or a heavy shot directly below the float achieves the same effect. The float becomes very stable and when mending the line it will just ride up in the water a little. The way Ivan Marks used the zoomer attached top and bottom would result in this effect and would allow some control when fishing well out in waters like the Welland.
- Match Aerial
- Arctic Char
- Posts: 1661
- Joined: Fri Dec 19, 2014 7:16 pm
- 9
Re: The story of the Fluted Float
I agree Phil
After much perseverance a big shot below a cane stem float makes it behave like a lignum or heavy wire stem float in my opinion.
It makes life a lot easer when you know that LOL
After much perseverance a big shot below a cane stem float makes it behave like a lignum or heavy wire stem float in my opinion.
It makes life a lot easer when you know that LOL
- Mike Wilson
- Perch
- Posts: 491
- Joined: Wed Sep 07, 2011 12:09 am
- 12
- Location: Hazlemere, High Wycombe, Bucks
Re: The story of the Fluted Float
Nobby
In you photo you show a vaned float and in you blog there is a photo of loads I made for BFW members [with all the flutes]. I could not get on with them. Have you, or others, ever tried them?
Take care
Mike
In you photo you show a vaned float and in you blog there is a photo of loads I made for BFW members [with all the flutes]. I could not get on with them. Have you, or others, ever tried them?
Take care
Mike
- Nobby
- Wild Carp
- Posts: 10983
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: The story of the Fluted Float
Santiago wrote:"No nothing about the use of the floats....... " Nobby 18/10/2015
I don't believe you!!!!
Ta for that...I think I got spellchecking into a load of old nonsense there...para now corrected to at least make some sense.......
- Nobby
- Wild Carp
- Posts: 10983
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: The story of the Fluted Float
Mike Wilson wrote:Nobby
In you photo you show a vaned float and in you blog there is a photo of loads I made for BFW members [with all the flutes]. I could not get on with them. Have you, or others, ever tried them?
Take care
Mike
I well remember the floats Mike...total dedication and admirable consistency. I did make a few myself and have yet to try them...daft really as I still don't know if they will really move to the far side.......
Here's Mike's floats fellers.......deep respect! Aeros and fluted avons.
- Tengisgol
- Barbel
- Posts: 4887
- Joined: Sun Apr 21, 2013 4:49 pm
- 11
- Location: Essex Boy
- Contact:
Re: The story of the Fluted Float
They are things of beauty!
Where the willows meet the water...
https://sites.google.com/site/tengisgol/
https://sites.google.com/site/tengisgol/
- Nobby
- Wild Carp
- Posts: 10983
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: The story of the Fluted Float
He's a lean, mean float-makin' machine!
- Nobby
- Wild Carp
- Posts: 10983
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: The story of the Fluted Float
I've been meaning to put this image here for years....honestly....my memory.
In searching through fishing tackle patents a few years back I found this:
It's the images from a patent granted in 1947 to a Mr. Oates and a Mr. Davies, both of Yorkshire, for fluted floats.
Since no one I know of is aware of any being made so early...them not appearing until about 1964, the year of Albert Smalley's death, ..or maybe a bit ealier? I can only presume that they never went into production.
I don't know how long UK patents lasted then for sure, but I believe it was 15 years, just like the Hardy full bail patent that stopped J W Young from making one until 1954, or Mitchell from importing into the UK, the full bail reel they were already selling in the US.
If patents did indeed last 15 years, as I suspect, the fluted float would have been protected until 1962....which is close to when they finally did get made.
I'm not for one moment suggesting the Major et al didn't have the idea themselves unaware that the idea had ocurred before and even been patented.
Another patent I found was for the pith float, with a particular reference to elder being used.........approved in 1929:
In searching through fishing tackle patents a few years back I found this:
It's the images from a patent granted in 1947 to a Mr. Oates and a Mr. Davies, both of Yorkshire, for fluted floats.
Since no one I know of is aware of any being made so early...them not appearing until about 1964, the year of Albert Smalley's death, ..or maybe a bit ealier? I can only presume that they never went into production.
I don't know how long UK patents lasted then for sure, but I believe it was 15 years, just like the Hardy full bail patent that stopped J W Young from making one until 1954, or Mitchell from importing into the UK, the full bail reel they were already selling in the US.
If patents did indeed last 15 years, as I suspect, the fluted float would have been protected until 1962....which is close to when they finally did get made.
I'm not for one moment suggesting the Major et al didn't have the idea themselves unaware that the idea had ocurred before and even been patented.
Another patent I found was for the pith float, with a particular reference to elder being used.........approved in 1929: