John...I hope it meets with your approval.

The Other Traditional Rods forum.
Post Reply
User avatar
TrentFisher
Crucian Carp
Posts: 787
Joined: Mon Nov 18, 2013 8:13 pm
10
Location: Nottingham

John...I hope it meets with your approval.

Post by TrentFisher »

Hi Gentleman,

just a follow on from the generous offer made recently by fellow member Muscavado (John) who offered these items for the cost of postage.

12ft and 13ft Lee of Redditch Golden Jubilee Fyberon Glass.I am very pleased I sent the PM and secured them.

John added to this offer by including a Geo. Wilkins & Sons The Trent 12ft ,which was in need of some TLC.
Overall the rod was very sound,the varnish was in need of refreshing,the middle section needed new guides.
I wanted to retain the transfer on the butt all the red whippings and the top section as it was in good condition apart from a clean.
I had a look in the odds and ends box and decided to add the new guides to the middle and the same guide to the butt.I only had a dark green whipping so used this for the guides and added further whippings to the ferrules and joints on the other sections to balance the colours.
The rod had a darker varnish but I stripped this away apart from the transfer area on the butt.
I very happy with the overall finish to this unexpected project....I hope you approve John.
Many thanks once again.
All the best
Nige.

Image
Image
Image
Image
Image
Image

User avatar
Keston
Tench
Posts: 2587
Joined: Sun Feb 08, 2015 5:48 pm
9
Location: Fareham on the sunny south coast .

Re: John...I hope it meets with your approval.

Post by Keston »

That looks smashing.
Well done both of you . :Hat:

User avatar
Muscavado
Grayling
Posts: 633
Joined: Thu Sep 08, 2016 6:22 pm
7

Re: John...I hope it meets with your approval.

Post by Muscavado »

Nige,

Wow! I’m so pleased to see what a grand job you have done. You ought to be so proud of yourself.
Looking forward to hearing about you emptying the Colwick swims on the glorious 16th

John :Hat:

User avatar
Crucian
Eel
Posts: 2313
Joined: Thu Apr 03, 2014 8:20 pm
10
Location: Watchet, Somerset.

Re: John...I hope it meets with your approval.

Post by Crucian »

Nice job :Thumb:

User avatar
Wallys-Cast
Pike
Posts: 6594
Joined: Tue Mar 20, 2012 11:02 am
12
Location: Durham.

Re: John...I hope it meets with your approval.

Post by Wallys-Cast »

Lovely job Nige, that's another nice rod saved from a retirement in the greenhouse.. Well done to you both..

Wal.

User avatar
AshbyCut
Honorary President
Posts: 10142
Joined: Sun May 06, 2012 1:27 am
11
Location: North Warwickshire

Re: John...I hope it meets with your approval.

Post by AshbyCut »

The TFF at it's best !!! Nicely done, Gentlemen.
"Beside the water I discovered (or maybe rediscovered) the quiet. The sort of quiet that allows one to be woven into the tapestry of nature instead of merely standing next to it." Estaban.

Paul D

Re: John...I hope it meets with your approval.

Post by Paul D »

How lovely, well done chaps.

User avatar
TrentFisher
Crucian Carp
Posts: 787
Joined: Mon Nov 18, 2013 8:13 pm
10
Location: Nottingham

Re: John...I hope it meets with your approval.

Post by TrentFisher »

Nige,

Wow! I’m so pleased to see what a grand job you have done. You ought to be so proud of yourself.
Looking forward to hearing about you emptying the Colwick swims on the glorious 16th

John

Hi John ,
I am glad you like the finished rod.My Ambidex's and Nottingham reel suit it very well.I will certainly be spoilt for choice come the 16th.

Many thanks to everyone for your comments,I enjoy the odd project and then enjoy the rewards of using the end results even more.

All the best
Nige

User avatar
Richard Jackson
Brown Trout
Posts: 1493
Joined: Wed May 04, 2016 3:16 pm
7
Location: Newark on trent

Re: John...I hope it meets with your approval.

Post by Richard Jackson »

Well done gents , excellant job
I spend most of my life fishing the Rest i just waste

Post Reply

Return to “Other Traditional Cane Rods”