Home Made Swim Feeders

Made some other form of traditional fishing tackle.
User avatar
Stour Otter
Rudd
Posts: 391
Joined: Thu May 23, 2013 5:40 pm
Location: Bournemouth, Dorset

Home Made Swim Feeders

Post by Stour Otter » Thu Feb 02, 2017 4:52 pm

I can still remember the thrashing I had from my father as a very young angler when I decided to made my first home-made swim feeders from my mother's blue and pink plastic hair curlers. I went for the blue ones of cause and being a little over zealous with them, she soon realised she had an in balance of colours.
In later life and once the memory was less painful I returned to the home-made swim feeder, using ring binders, then old bird feeders mesh and have just found a "Party Popper" that I must have picked up from the river bank years ago which I thought may have possibilities for liquidized bread, but never put the plan into operation.
Any way here they are, no giggling please.

Plastic Ring Binders
Image
Old Bird Feeder mesh and a Party Popper
Image

Oh, please wipe your eyes.

Stour Otter
Last edited by Stour Otter on Fri Feb 03, 2017 7:43 am, edited 1 time in total.
The good angler is not the one with expensive equipment. Common sense, observation and trying to realize
what is happening above and below water will catch fish no matter what price equipment you fish with.
L.A. Parker - This Fishing 1948

User avatar
OldTackle
Arctic Char
Posts: 1593
Joined: Fri Jan 02, 2015 11:40 pm
Location: Germany

Re: Home Made Swim Feeders

Post by OldTackle » Thu Feb 02, 2017 4:58 pm

Nothing to lough about, Sir. Especially the ring binders I find quite ingenious :Hat:
And those bird feeder mesh ones: Aren't many modern ones look just the same?
I am sure the party popper would make a pristine bite indicator.
< °) >>><( Christopher )><<< (° >

User avatar
Marc
Zander
Posts: 3512
Joined: Sun Mar 10, 2013 11:14 am
Location: Co Durham, land of the prince bishops

Re: Home Made Swim Feeders

Post by Marc » Thu Feb 02, 2017 7:00 pm

Party popper monkey climbers?? Not a sentence I ever thought I'd type.
Marc. (Prince of Durham)

"Then, as it was, then again it will be. And though the course may change sometimes. Rivers always reach the sea"

User avatar
Dave Burr
Salmon
Posts: 8297
Joined: Fri Jul 20, 2012 7:03 pm
Location: Not far from the Wye
Contact:

Re: Home Made Swim Feeders

Post by Dave Burr » Thu Feb 02, 2017 7:20 pm

I've made my own feeders out wire mesh (like you get on bird feeders), and they looked very similar to yours Mr Otter. I also used them for method feeding by simply crushing them and wrapping the stodge around it.

However, my son sent me an image of a homemade feeder the other day. Apparently it was snagged by someone trotting on the Wye. I say 'feeder', it may actually be an otter trap.

Image

User avatar
Kevin
Chub
Posts: 1113
Joined: Thu Nov 17, 2011 6:54 pm
Location: Knutsford

Re: Home Made Swim Feeders

Post by Kevin » Thu Feb 02, 2017 7:30 pm

Up cycling after the office party,im laughing,with you.

User avatar
Olly
Sea Trout
Posts: 4153
Joined: Sat Dec 15, 2012 12:58 pm
Location: Hants/Surrey/Berks borders.

Re: Home Made Swim Feeders

Post by Olly » Thu Feb 02, 2017 7:57 pm

I wish Otters were that small!

User avatar
Shimano
Minnow
Posts: 34
Joined: Sun Jan 01, 2017 12:46 pm

Re: Home Made Swim Feeders

Post by Shimano » Mon Feb 13, 2017 10:13 am

I make all my own swim feeders I normally use plastic 1-1/4 waste pipe about 11/2 long as I was in the trade and drill 1/4 holes in the sides wrap some solder around and away you go, it also puts out plenty of feed in the swim

User avatar
Old Man River
Silver Bream
Posts: 201
Joined: Wed Nov 25, 2015 3:43 pm
Location: Yorkshire

Re: Home Made Swim Feeders

Post by Old Man River » Tue Jul 25, 2017 1:55 pm

I have made my own feeders for years, the most recent efforts are made from brown plastic plant protector tubes . I had a big bundle left after I planted a country hedge a couple of years ago, they make nice brown flexible open ended feeders, one tube will make about a good half dozen or more, a strip of lead flashing provides the weight, very simple, very effective.A bonus is that being flexible , if they get snagged behind a rock they just seem to "spring" out if given a quick jerk.The loop is made from mono, which is just clipped onto a sliding rig link on the main line.

Image

I have made feeders from all sorts of bits over the years, the lighter coloured ones are for reservoir bream, they dont seem to mind what colour the feeders are, the darker coloured ones are for rivers where I have noticed that brighter colours seem to put the fish off a bit.

Image

Over time I have found that it is quicker and easier to heat up a steel rod and melt the holes in the feeder instead of drilling them.I usually use a thick tent peg.

O M R
Hurrumph....... whatever happened to Handlines ?

User avatar
Northern_Nomad
Crucian Carp
Posts: 820
Joined: Wed Nov 27, 2013 8:10 pm
Location: Wales

Re: Home Made Swim Feeders

Post by Northern_Nomad » Tue Jul 25, 2017 6:30 pm

Things have never been the same since digital camera's put paid to 35mm film SLR's. The plastic film tubs were ideal.

I know you can still buy them but it just isn't the same as recycling the ones you bought for film and collecting from friends and family :fingertap:
"We knelt side by side looking at it. I knew it was big, and suddenly it dawned on me it was more than that. It was tremendous!" - Richard Walker

User avatar
GregF
Crucian Carp
Posts: 813
Joined: Thu Nov 15, 2012 5:17 pm
Location: Essex

Re: Home Made Swim Feeders

Post by GregF » Wed Jul 26, 2017 3:56 am

A bit more traditional?
Image
http://thelegacycarpnovel.blogspot.co.uk/

http://carpspotting.blogspot.com

http://piscespoetry.blogspot.com

"Give up haste and ambition, close your mouth, only then will you comprehend the spirit of Tao" - Lao Tze

Post Reply

Return to “Making Other Items of Traditional Fishing Tackle”

Who is online

Users browsing this forum: No registered users and 2 guests