Stained glass work
- Evert van der Plas
- Perch
- Posts: 427
- Joined: Mon Dec 15, 2014 11:57 pm
- 9
- Location: The Netherlands
- Contact:
Stained glass work
Hi Gents
i start with making fish and birds from glass called Tiffany, made a first kingfisher just to see how it go's.
I used colored glass that i cut out and solder all the bits to gather to one piece and must say it is very satisfying to make things from glass.
i want to improve the technique and make quality stained glass fish and birds on natural wood
let me know what you think :-)
Kingfisher the first attemp
Desing for a pike on wood
Still working on this Pike but it look promising, this is a larger model
i start with making fish and birds from glass called Tiffany, made a first kingfisher just to see how it go's.
I used colored glass that i cut out and solder all the bits to gather to one piece and must say it is very satisfying to make things from glass.
i want to improve the technique and make quality stained glass fish and birds on natural wood
let me know what you think :-)
Kingfisher the first attemp
Desing for a pike on wood
Still working on this Pike but it look promising, this is a larger model
- Pallenpool
- Zander
- Posts: 3712
- Joined: Tue Sep 06, 2016 2:04 pm
- 7
- Location: North Norfolk
Re: Stained glass work
Great stuff Evert - no mean feat to create like this in glass - superb.
No man ever steps in the same river twice, for it's not the same river and he's not the same man.
Heraclitus
www.thepiscatorialraconteurs.co.uk
Heraclitus
www.thepiscatorialraconteurs.co.uk
- Fredline
- Tench
- Posts: 2612
- Joined: Sat May 16, 2015 1:10 pm
- 8
- Location: East End of the City
Re: Stained glass work
Very clever and stunning to look at.
If you have no grease with you, and your rings are full of ice, do not cut out the ice with a pen-knife but get your man to put the rings one by one in his mouth, and so to thaw the ice.
John Bickerdyke.
John Bickerdyke.
- Robbi
- Tench
- Posts: 2929
- Joined: Thu Feb 14, 2013 9:40 pm
- 11
Re: Stained glass work
They look really good, what do you use to cut the lead ?
"In the back roads by the rivers of my memory"
- Evert van der Plas
- Perch
- Posts: 427
- Joined: Mon Dec 15, 2014 11:57 pm
- 9
- Location: The Netherlands
- Contact:
Re: Stained glass work
This is Tiffany and with this technique you use copper tape that go round the glass particles when it is all done all parts will be soldered to gather
- Liphook
- Barbel
- Posts: 4724
- Joined: Mon Sep 03, 2018 6:21 pm
- 5
Re: Stained glass work
That pike would make a grand fanlight pane Evert
- Evert van der Plas
- Perch
- Posts: 427
- Joined: Mon Dec 15, 2014 11:57 pm
- 9
- Location: The Netherlands
- Contact:
Re: Stained glass work
Almost Finished, Merry Christamas gents
- Wanderer
- Arctic Char
- Posts: 1500
- Joined: Fri Nov 13, 2020 4:03 am
- 3
- Location: YORKSHIRE
Re: Stained glass work
Those are very good.
The Kingfisher is very impressive for your first attempt.
The Kingfisher is very impressive for your first attempt.
"Not all those who Wander are Lost !"
- Evert van der Plas
- Perch
- Posts: 427
- Joined: Mon Dec 15, 2014 11:57 pm
- 9
- Location: The Netherlands
- Contact:
Re: Stained glass work
Made a few dragonflys and a small glass window with a kingfisher