Silex Major parts
- OhMyGoodness
- Bleak
- Posts: 142
- Joined: Thu Feb 04, 2021 5:18 am
- 3
Re: Silex Major parts
I have come into possession of a couple of old Silex major which are good for parts. Do you still need anything?
- Silexman
- Ruffe
- Posts: 56
- Joined: Tue May 13, 2014 9:17 pm
- 9
- Location: Penang & Northumberland
Re: Silex Major parts
Hi OMG
I am indeed still looking for the regulator screw and ideally a full size foot with the screw holes in the right place.
I am indeed still looking for the regulator screw and ideally a full size foot with the screw holes in the right place.
- OhMyGoodness
- Bleak
- Posts: 142
- Joined: Thu Feb 04, 2021 5:18 am
- 3
- Silexman
- Ruffe
- Posts: 56
- Joined: Tue May 13, 2014 9:17 pm
- 9
- Location: Penang & Northumberland
Re: Silex Major parts
Hi OMG
My original post has photos included. I've tried to add more now but can't work out how to do it. The bits I need are:-
a) the foot needs replacing. It is 10cm long. I have a replacement but unfortunately the screw holes are the wrong way round.
b) the regulator screw. The internal bits are all there - only the screw is missing. The second original photo shows at the top left a small wrong screw in the hole where the proper screw is supposed to go. The third photo at 8 o'clock shows the internal bit the screw goes into.
I've tried to find out how to include more photos but I've been beaten.
I hope that you can help
Regards
Mike
My original post has photos included. I've tried to add more now but can't work out how to do it. The bits I need are:-
a) the foot needs replacing. It is 10cm long. I have a replacement but unfortunately the screw holes are the wrong way round.
b) the regulator screw. The internal bits are all there - only the screw is missing. The second original photo shows at the top left a small wrong screw in the hole where the proper screw is supposed to go. The third photo at 8 o'clock shows the internal bit the screw goes into.
I've tried to find out how to include more photos but I've been beaten.
I hope that you can help
Regards
Mike