Hi folks! I have recently acquired a small collection of Rapidexes (Rapidices?) Two Rapidex, one Trudex and a Milward's FloatCraft (in brown!). I would like to give them a quick fettle before deciding which are to be "users" and which to be "for the wall"..
None of them are exactly "spinny" but all of them are in 'good' to 'very good' nick.
I have had a look at old threads here, and see that the maestro, 'Nobby', advises petrol for a first clean (!). Does this mean lighter fluid or actual petrol? Surely a bit niffy and combustible for sitting in front of the TV with a cleaning rag? And surely a bit aggressive? Will it affect the paint? I have IPA in an aerosol can, would that do?
An American site advises "mineral spirit" which I think is what we call "white spirit", also a bit niffy?
I have an ultrasonic bath, but the Rapidex and derivatives seem to be so simple that this seems to be overkill?
And so on to the Mitchells (I have several). How to do a "first-clean"? Ancient, thick grease? Literally manually? Or use the U/S bath with... soap (fairy-liquid) or should I invest in some "watchmaker's fluid"?
All advice is welcome!
I also have a Rapidex derivative on which the little spool-release lever has no bounce... I understand that there should be a little spring inside, which on this one I guess, is broken or not there. Is there a solution or bodge?
Non-destructive fettling @Nobby
- Tengisgol
- Barbel
- Posts: 4904
- Joined: Sun Apr 21, 2013 4:49 pm
- 11
- Location: Essex Boy
- Contact:
Re: Non-destructive fettling @Nobby
The pins are really easy to clean up. Use a little white spirit on a rag and just wipe everything down until clean. Clean inside the tube/pin housing similarly with either a clean rag or paper towels. Or you can use a cotton bud. Clean the pin itself. Pop a couple of drops of sewing machine oil on the pin and some dabs of grease around the ratchet mechanism - just a tiny bit. It is all that simple.
Then give it a spin.
Then give it a spin.
Where the willows meet the water...
https://sites.google.com/site/tengisgol/
https://sites.google.com/site/tengisgol/
- Tengisgol
- Barbel
- Posts: 4904
- Joined: Sun Apr 21, 2013 4:49 pm
- 11
- Location: Essex Boy
- Contact:
Re: Non-destructive fettling @Nobby
Oh, the Mitchell’s, that’s easy too - send them to Nobby.
Where the willows meet the water...
https://sites.google.com/site/tengisgol/
https://sites.google.com/site/tengisgol/
- Wakou
- Rudd
- Posts: 314
- Joined: Sun Mar 05, 2023 5:29 pm
- 1
Re: Non-destructive fettling @Nobby
Thank you Tengisgol! I have read an article by Nobby, in which he "suggests" some improvements to the basic Mitchell 300, sort of "blueprinting" .. I am sorely tempted to ask him to do the full works on one of mine. But I guess that this would be "not cheap" And it would demand an excellent "donor". I have a "Brand new, never used" 300.....
- Rod Fisher
- Silver Bream
- Posts: 223
- Joined: Fri Oct 21, 2022 5:34 pm
- 1
Re: Non-destructive fettling @Nobby
You can get a release lever spring or a whole new release cap set from Garry Mills. Consider grabbing a bottle of pin oil at the same time.
"Keep out of sight. Trout has no eyebrows and can see up." - Forest and Stream 1904.
“A man may read books and get the best advice possible, but he will profit little by one or the other without practice.” - William Bailey
“A man may read books and get the best advice possible, but he will profit little by one or the other without practice.” - William Bailey
- Wakou
- Rudd
- Posts: 314
- Joined: Sun Mar 05, 2023 5:29 pm
- 1
Re: Non-destructive fettling @Nobby
Thank you Rod!
- Tengisgol
- Barbel
- Posts: 4904
- Joined: Sun Apr 21, 2013 4:49 pm
- 11
- Location: Essex Boy
- Contact:
Re: Non-destructive fettling @Nobby
Where the willows meet the water...
https://sites.google.com/site/tengisgol/
https://sites.google.com/site/tengisgol/
- Crucian
- Eel
- Posts: 2348
- Joined: Thu Apr 03, 2014 8:20 pm
- 10
- Location: Watchet, Somerset.
Re: Non-destructive fettling @Nobby
I’ve had reels serviced by Nobby, bought reels from him as well. He certainly knows his Mitchell’s, and I’m sure he could look at your pins too. Highly recommended.