Page 2 of 2
Re: harlow pin
Posted: Sat Feb 03, 2024 1:22 pm
by JAA
Steve Ribb wrote: ↑Sat Feb 03, 2024 1:20 pm
this is whats missing on mine
The whole spool?
Re: harlow pin
Posted: Sat Feb 03, 2024 1:26 pm
by Steve Ribb
no the caliper
Re: harlow pin
Posted: Sat Feb 03, 2024 8:33 pm
by Olly
Ok - missing.
A metal ring/spring held in by solid ring/washer screwed in by a screw/bolt through the lowest hole!
It is split on either side of the ratchet. The dimensions on the ring are etched on you backplate.
So 3 items missing the spring - the internal washer/retainer - and knob exactly like the upper one>
best I can say.
Re: harlow pin
Posted: Sun Feb 04, 2024 5:51 am
by Steve Ribb
yes olly thats whats missing,a picture of whats missing would be great
Re: harlow pin
Posted: Sun Feb 04, 2024 8:25 am
by Stour Otter
Steve Ribb wrote: ↑Sun Feb 04, 2024 5:51 am
yes olly thats whats missing,a picture of whats missing would be great
Morning Steve.
Hope this helps. I use Autosol to clean alloy reels, nothing too abrasive, apply with a piece of kitchen paper.
Regards
Stour Otter
Re: harlow pin
Posted: Sun Feb 04, 2024 9:40 am
by Steve Ribb
many thanks for the pictures,greatly appreciated. i was wondering if it had a steel or copper caliper,but now see its steel...many thanks to all who have replied to my post it really is appreciated.
Re: harlow pin
Posted: Sun Feb 04, 2024 11:07 am
by JAA
Steve Ribb wrote: ↑Sat Feb 03, 2024 1:26 pm
no the caliper
Re: harlow pin
Posted: Sun Feb 04, 2024 11:08 am
by JAA
Steve Ribb wrote: ↑Sun Feb 04, 2024 9:40 am
many thanks for the pictures,greatly appreciated. i was wondering if it had a steel or copper caliper,but now see its steel...many thanks to all who have replied to my post it really is appreciated.
Both of my Harlow's have exactly the same arrangement btw.