The Traditional Fisherman's Forum

Hello Gentlemen.
I have been trying to find a replacement ring for an Ivan Marks lightening Float rod on the web and romsey tackle fair for over a year, but to no avail... Yet!



Here are some measurements.

15-16mm to top of ring
25-26mm taper end to taper end
Ring diameter 6-7mm
Black anodised
3rd ring from the butt on the middle section.

Sorry about the image quality.

Any help or information would be very gratefully appreciated. Many thanks
Tony

PM and photograph sent.

Thanks Mark. PM replied too.

I think I have one in my box if this hasn't worked out. PM me if you want me to look, cheers.

Tengisgol wrote: ↑Tue Oct 03, 2017 6:45 am I think I have one in my box if this hasn't worked out. PM me if you want me to look, cheers.

Thank you Tengisgol for your very kind offer. If need be I will be touch.

Penninelad wrote: ↑Mon Oct 02, 2017 9:45 pm PM and photograph sent.

Thanks Mark. PM replied too.

That's a Fuji ring in black, some had luminous inserts!

Is the middle chrome coloured - it appears so? And the ring outside of that red?

If so it was used on Daiwa rods. I have a set from an old carp/avon rod which is identical - except for "bracing" to strengthen the rings.

Olly wrote: ↑Wed Oct 04, 2017 2:58 pm Is the middle chrome coloured - it appears so? And the ring outside of that red?

If so it was used on Daiwa rods. I have a set from an old carp/avon rod which is identical - except for "bracing" to strengthen the rings.

Yes Olly chrome and red in between. It is a Diawa rod, been trying for a while to get a ring for this rod.

Nobby wrote: ↑Wed Oct 04, 2017 1:36 pm That's a Fuji ring in black, some had luminous inserts!

Hello Nobby. Didn't they do a range of rings called Seymo in the late 70's early 80's ?