Hook size inconsistencies
- Coral Maestro
- Chub
- Posts: 1041
- Joined: Sun Feb 02, 2020 2:58 pm
- 4
- Location: Correze, France
Hook size inconsistencies
Has anyone noticed how inconsistent hook sizing is nowadays? Here is a picture of different model size 18 hooks from the same manufacturer:
What do they know of fishing who know only one fish and one way to fish for him?
- Jack Hargreaves.
- Jack Hargreaves.
- Dave Burr
- Honorary Vice President
- Posts: 13508
- Joined: Fri Jul 20, 2012 7:03 pm
- 11
- Location: Not far from the Wye
- Contact:
Re: Hook size inconsistencies
CM, You are comparing apples with oranges. It's because they are different patterns. The one on the right is a wide gape which requires a shorter shank whereas the one on the left is a straight point. The straight shank is actually longer (bigger?) than the wide gape which, due to the extra strength needed to retain its integrity under pressure, has a heavier wire.
Hope this helps
Hope this helps
- Nigel Rainton
- Rainbow Trout
- Posts: 3338
- Joined: Thu Nov 29, 2012 6:07 pm
- 11
- Location: Dartmoor
- Contact:
Re: Hook size inconsistencies
Dave,
Far be it for me to disagree with the TFF aristocracy but . . . . the size of the hook is the measure of the gape. There is no such thing as a wide gape 18, it would be a size 16.
What has made it even more confusing is the introduction of odd numbers. My favourite Tiemco dry fly hooks are size 11 and 13 :-(
Awaiting inbound :-)
Far be it for me to disagree with the TFF aristocracy but . . . . the size of the hook is the measure of the gape. There is no such thing as a wide gape 18, it would be a size 16.
What has made it even more confusing is the introduction of odd numbers. My favourite Tiemco dry fly hooks are size 11 and 13 :-(
Awaiting inbound :-)
- Old Man River
- Eel
- Posts: 2173
- Joined: Wed Nov 25, 2015 3:43 pm
- 8
- Location: Yorkshire
Re: Hook size inconsistencies
I gave up buying hooks by quoted manufacturers size many years ago.
I much prefer to actually see what I am buying and buy to my requirements.
Hook sizes in my opinion mean very little. This moves across to the saltwater hooks I use either off the beach or boat as well.
I have no use for a hook smaller than a size 16 as I used to understand it anyway, and tbh rarely use anything smaller than a 14 old scale anyway.
David
I much prefer to actually see what I am buying and buy to my requirements.
Hook sizes in my opinion mean very little. This moves across to the saltwater hooks I use either off the beach or boat as well.
I have no use for a hook smaller than a size 16 as I used to understand it anyway, and tbh rarely use anything smaller than a 14 old scale anyway.
David
Hurrumph....... whatever happened to Handlines ?
- Olly
- Wild Carp
- Posts: 9121
- Joined: Sat Dec 15, 2012 12:58 pm
- 11
- Location: Hants/Surrey/Berks borders.
Re: Hook size inconsistencies
Like the above - however that my be due to my eyesight as I approach that dreaded time - 'Old Age'!!
***
The size of the hook is based on the gap between the shank of the hook and its shaft (known as its gape) as well as the length of the shaft. It's given as a number and the bigger the number, the smaller the size of the hook — up to a point.***
I don't think that's how some Co's do it?
***
The size of the hook is based on the gap between the shank of the hook and its shaft (known as its gape) as well as the length of the shaft. It's given as a number and the bigger the number, the smaller the size of the hook — up to a point.***
I don't think that's how some Co's do it?
Last edited by Olly on Mon Sep 06, 2021 1:33 pm, edited 1 time in total.
- Catfish.017
- Eel
- Posts: 2203
- Joined: Wed Apr 04, 2012 8:53 am
- 12
- Location: Fradley Junction quite often!
Re: Hook size inconsistencies
I'm with C M and N R on this, the over riding benchmark should be the gape. Any variation from a standard should be in the description of the shank length. So going back to C M's photo, the hook on the right should be marketed as a short shank 16. To say it's an 18 is nonsense.
- Olly
- Wild Carp
- Posts: 9121
- Joined: Sat Dec 15, 2012 12:58 pm
- 11
- Location: Hants/Surrey/Berks borders.
Re: Hook size inconsistencies
Hook sizes in Japan were odds and evens! Back in the 90's Owner and Maruta Kinryu companies made hooks with the largest size being 14 downsizing to size 7. Kuroshio ones were from 5 to 9. All spade end very sharp hooks used for carp, tench, barbel, chub, etc
- Coral Maestro
- Chub
- Posts: 1041
- Joined: Sun Feb 02, 2020 2:58 pm
- 4
- Location: Correze, France
Re: Hook size inconsistencies
Thanks for all your comments. The whole point of a post such as this is to stimulate conversation and hear what people's opinions and experiences are.
The issue I have in this case is that if you are "distance buying" such as from Amazon, Ebay or online fishing stores it's useful to know what size hooks you are going to receive. If there are inconsistencies in hook sizes between manufacturers or within one manufacturer's range then you won't know what you are going to get. In my case I mainly stick to patterns I already have experience of.
The issue I have in this case is that if you are "distance buying" such as from Amazon, Ebay or online fishing stores it's useful to know what size hooks you are going to receive. If there are inconsistencies in hook sizes between manufacturers or within one manufacturer's range then you won't know what you are going to get. In my case I mainly stick to patterns I already have experience of.
What do they know of fishing who know only one fish and one way to fish for him?
- Jack Hargreaves.
- Jack Hargreaves.
- AshbyCut
- Honorary President
- Posts: 10142
- Joined: Sun May 06, 2012 1:27 am
- 11
- Location: North Warwickshire
Re: Hook size inconsistencies
The 'patterns' of modern fishing hooks is an absolute minefield ... and would that it were as simple as NR's assertion that "the size of the hook is the measure of the gape."
The hooks in CM's first post are completely different, and are for different baits. The PR 26 (now discontinued) was designed for angling with pinkies, whereas the PR 478 with a wider 'gape' is designed, according to Prestons, for fishing larger baits (I assume like pellets etc).
It's not possible to compare hooks with different pattern numbers, and maybe also made by different manufacturers (or cheap unbranded examples).
All I can suggest is ... find a hook in the style you like, made my the same manufacturer, and stick with it ... only then you can be sure of consistency.
The hooks in CM's first post are completely different, and are for different baits. The PR 26 (now discontinued) was designed for angling with pinkies, whereas the PR 478 with a wider 'gape' is designed, according to Prestons, for fishing larger baits (I assume like pellets etc).
It's not possible to compare hooks with different pattern numbers, and maybe also made by different manufacturers (or cheap unbranded examples).
All I can suggest is ... find a hook in the style you like, made my the same manufacturer, and stick with it ... only then you can be sure of consistency.
"Beside the water I discovered (or maybe rediscovered) the quiet. The sort of quiet that allows one to be woven into the tapestry of nature instead of merely standing next to it." Estaban.
- Fred
- Grayling
- Posts: 567
- Joined: Thu Jan 08, 2015 9:44 pm
- 9
- Location: North Kent
Re: Hook size inconsistencies
I find it easier to stick to one make and model no. these days as there so meany different brands out there you can get in a muddle.
If I find some thing that works I just stick with it.
If I find some thing that works I just stick with it.
Fish come and go, but it is the memory of afternoons on the stream that endure