Hello from the Shire's
Posted: Mon Mar 25, 2024 9:13 pm
Hello all.
An engaging process of joining. I may or may not be in the right place but recent research into buying my first cane rod keeps pointing me back to here so here i am.
Bit of a fly fisher with xxxbon rods but been looking at Cane rods, mostly beat up ones in vintage antique emporiums.
I found something from Milwards and researching that brings up this forum as a good resource for the brand and other than here a few posts across the pond with the Americans.
With the aid of another non-fishing forum that has a few cane users and general fishers on board i have compiled a check list for my hopefully first foray into the world of Cane.
Looked at this rod a couple of times and thought maybe, but maybe a shorter modern rod to what i have, will do for the river i intend to fish on. So last week i walked the river bank after renewing my EA rod licence, and the storms and flooding since last autumn have scoured the banks clean, so clean that i have walked in places that where unwalkable last year and being stuck under trees and overgrowth and things that will foul a backcast have all gone, and then i look at this cane rod again, still there in the shop.
If i don't have to worry about low trees and fouled back cast do i need a shorter rod.... maybe a vintage 9'+ cane rod would do.
And the rod is still there.
I looked again today armed with a check list, as i intend to use it. Milwards Fly craft 9' 6"
Is the rod complete, yes but no bag.
Does the rod have a spare tip, yes and it's equal length across the pair, but one has had guides rewhipped badly.
The guides and eyes all there. Yes might be ceramic tip eyes, Agate bottom eye and snake guides but all dirty, gunked up and rough.
The Agate eye appears intact not cracked.
The rod sections appear to be straight and no off "sets"
The connections between rod sections seem good, not tight, but not slack, everything seems to fit as it should with no force.
The reel seat is Alloy the grip cork is in good order and a hook keeper is present.
When sections are put together rod seems straight.... couldn't do a full 3 section due to many people in the shop.
I should have got it then, but wanted to look for more info so may miss out but i would rather learn and hopefully not have a snapper first time i try to use the rod with line on a river.
Aiming to go back and check again and most likely get it.
Then i have to learn how to care for a cane rod, maybe rewhip one of the tip sections and perhaps a dab of varnish here and there or a heavy coat of beeswax and try my first cane rod.
Hello all, i don't know much about cane rods
An engaging process of joining. I may or may not be in the right place but recent research into buying my first cane rod keeps pointing me back to here so here i am.
Bit of a fly fisher with xxxbon rods but been looking at Cane rods, mostly beat up ones in vintage antique emporiums.
I found something from Milwards and researching that brings up this forum as a good resource for the brand and other than here a few posts across the pond with the Americans.
With the aid of another non-fishing forum that has a few cane users and general fishers on board i have compiled a check list for my hopefully first foray into the world of Cane.
Looked at this rod a couple of times and thought maybe, but maybe a shorter modern rod to what i have, will do for the river i intend to fish on. So last week i walked the river bank after renewing my EA rod licence, and the storms and flooding since last autumn have scoured the banks clean, so clean that i have walked in places that where unwalkable last year and being stuck under trees and overgrowth and things that will foul a backcast have all gone, and then i look at this cane rod again, still there in the shop.
If i don't have to worry about low trees and fouled back cast do i need a shorter rod.... maybe a vintage 9'+ cane rod would do.
And the rod is still there.
I looked again today armed with a check list, as i intend to use it. Milwards Fly craft 9' 6"
Is the rod complete, yes but no bag.
Does the rod have a spare tip, yes and it's equal length across the pair, but one has had guides rewhipped badly.
The guides and eyes all there. Yes might be ceramic tip eyes, Agate bottom eye and snake guides but all dirty, gunked up and rough.
The Agate eye appears intact not cracked.
The rod sections appear to be straight and no off "sets"
The connections between rod sections seem good, not tight, but not slack, everything seems to fit as it should with no force.
The reel seat is Alloy the grip cork is in good order and a hook keeper is present.
When sections are put together rod seems straight.... couldn't do a full 3 section due to many people in the shop.
I should have got it then, but wanted to look for more info so may miss out but i would rather learn and hopefully not have a snapper first time i try to use the rod with line on a river.
Aiming to go back and check again and most likely get it.
Then i have to learn how to care for a cane rod, maybe rewhip one of the tip sections and perhaps a dab of varnish here and there or a heavy coat of beeswax and try my first cane rod.
Hello all, i don't know much about cane rods
And as of a few hours ago i now own my first Cane rod.