Page 1 of 1
Help with spool ID
Posted: Thu Apr 18, 2024 8:13 pm
by Harry H
Re: Help with spool ID
Posted: Thu Apr 18, 2024 9:21 pm
by Olly
I would say a closed face reel - which one ?? - not sure it is an ABU one though.
Re: Help with spool ID
Posted: Thu Apr 18, 2024 9:44 pm
by Coral Maestro
It may be an after market spool for an ABU 500 series reel. I've just measured a 500 series spool, top width is 53mm, spool depth is 16mm, hole diameter is 12mm and centre to centre distance on the mounting studs (brass in the case of your spool) is approx. 27mm. Hope this helps.
Re: Help with spool ID
Posted: Fri Apr 19, 2024 6:47 pm
by Harry H
Olly wrote: ↑Thu Apr 18, 2024 9:21 pm
I would say a closed face reel - which one ?? - not sure it is an ABU one though.
I haven't had much experience with this type of reel but
I sold a 505 recently and that had Made in Sweden on both spools.
Re: Help with spool ID
Posted: Fri Apr 19, 2024 7:14 pm
by Olly
ABU 5 series and Daiwa are the two old versions usually used - - although there are other makers!