Somebody mentioned that wooden reels had dropped in price, (I can't find out who, "wooden reels" doesn't turn it up, but many thanks!) so I had a little look and ended up buying this:
I'm very taken with the shallow drum and the Slater-style release. It won't spin more than about 15 seconds, but that's fine; it's a keeper and a user.
The vendor had "packed" it in a layer of bubble-wrap and a wrap of corrugated cardboard; whether causal or not, I don't know, but there was a slight, persistent rub.
It took a bit of Mrs Voles eyebrow pencil on the rim of the drum to locate the point inside the back, and a bit of sanding to remove it, and a couple of flushes through with lighter fuel to de-crud the works, but now it spins as freely as it's ever likely to, and I think it's a bit of a sweetie.
It was cheap enough for me to remove the latch for a look-see, as I've mentioned elsewhere, but here are all the pics:
The back, showing varnish loss:
The front, with the latch removed:
And the innards, in case anyone can suggest a maker:
The insides are unvarnished, except for the hollowing out of the back (another Sheffield-type!).
Get a load of the balancing system hammered into the hollow at about seven o'clock! It looks as though someone's driven a lead rivet in, and nibbled bits off the head with a chisel till it felt right.
Oh, and once again , the innards of the latch, all held safely by those two rivets:
So I'm left with one answer (That's what's inside a copy of a Slater) but loads of questions, and I'd really appreciate any help:
Why no varnish on the inside of the back, and the chamfered edge of the spool's back? Cost-cutting, or to let the wood "breathe"?
Should I leave the unvarnished bits untreated, or is this a cut corner that needs sorting out?
Any idea of the Maker? (I'm sure the coppery-bronze(?) spring is trying to tell me something, but I've no idea what!) It bears "Made in England" in an elliptical cartouche stamped into the shoulder of the mount, but no other markings.
Should I strip it and re-varnish, or just rub it with linseed oil until it seems full?
Is there anything I can do to upgrade the handle receivers? (ebay-acquired term, I'm afraid - I mean the eye-shaped brass plates that hold the handles on,) There are potential line-eating gaps between the handles and the plates, and between the plates and the woodwork, an' Ah jes' knows what's a-gonna happen...
I'll start another thread about what to do with the silk line that was on it...
Any input gratefully received!
Restoration advice, please?
The Nottingham Reels forum.
- Vole
- Rainbow Trout
- Posts: 3020
- Joined: Wed Oct 19, 2011 6:48 am
- 12
- Location: Barnet
Restoration advice, please?
You do not have the required permissions to view the files attached to this post.
"Write drunk, edit sober" - Hemingway.
Hemingway didn't have to worry about accidentally hitting "submit" before he edited.
Hemingway didn't have to worry about accidentally hitting "submit" before he edited.
- The Tuesday Swim
- Grayling
- Posts: 642
- Joined: Sat Sep 17, 2011 1:35 pm
- 12
- Location: Clapton on Lea
- Contact:
Re: Restoration advice, please?
Post by The Tuesday Swim »
Vole, you seem to be running two threads side by side but covering the same subject?
Jump to
- General Information:
- ↳ New Member Information and Welcome
- Traditional Fishing Tackle:
- ↳ Traditional Rods
- ↳ A. E. Rudge and Son Cane Rods
- ↳ Allcocks Cane Rods
- ↳ Andrew J. Davis Cane Rods
- ↳ Aspindale and Sons Cane Rods
- ↳ B. James & Sons Cane Rods
- ↳ Chapmans Cane Rods
- ↳ Constable Of Bromley Cane Rods
- ↳ Davenport & Fordham Cane Rods
- ↳ Dawsons of Bromley Cane Rods
- ↳ Edgar Sealey & Sons Ltd Cane Rods
- ↳ Edward Barder Cane Rods
- ↳ Fosters of Ashbourne Cane Rods
- ↳ F. T. Williams Cane Rods
- ↳ Hardy Cane Rods
- ↳ J. B. Walker Cane Rods
- ↳ J. S. Sharpe Ltd Cane Rods
- ↳ Lee & Sons Cane Rods
- ↳ Martin James Cane Rods
- ↳ Milwards Cane Rods
- ↳ Mordex Cane Rods
- ↳ Ogden Smith Cane Rods
- ↳ Oliver's of Knebworth Cane Rods
- ↳ Paul Cook Cane Rods
- ↳ Precision Cane Rods
- ↳ Priory of Bournemouth Cane Rods
- ↳ Rodrill of London Cane Rods
- ↳ The Modern Arms Company Ltd Cane Rods
- ↳ T. H. Sowerbutts & Sons Cane Rods
- ↳ Youngs of Harrow Cane Rods
- ↳ Cane Hybrid Rods
- ↳ Other Traditional Cane Rods
- ↳ Traditional Reels
- ↳ ABU Reels
- ↳ DAM Reels
- ↳ Grice and Young Reels
- ↳ Hardy Reels
- ↳ J. W. Young and Allcocks Reels
- ↳ Kenny Kendall Reels
- ↳ K. P. Morritts Reels
- ↳ Mordex Reels
- ↳ Nottingham Reels
- ↳ Speedia Reels
- ↳ Other Reels
- ↳ Traditional Landing Nets
- ↳ Cane Fishing Poles
- ↳ Traditional Terminal Tackle
- ↳ The History & Development of Fishing Tackle
- ↳ Other Traditional Items of Tackle
- ↳ Traditional Tackle Specifications, Data and Manuals
- ↳ Reel Data Archive
- ↳ Rod Taper Archive
- ↳ Tackle Manuals
- The Hall of Fame:
- ↳ Famous Traditional Anglers
- ↳ Albert Edward Hobbs
- ↳ BB (Denys Watkins Pitchford)
- ↳ Bernard Venables MBE
- ↳ Bill Quinlan
- ↳ Bob Buteux
- ↳ Bob Richards
- ↳ Chris Ball
- ↳ Chris Yates
- ↳ Dick Walker
- ↳ Eddie Price
- ↳ Fred J. Taylor
- ↳ F. W. K. Wallis
- ↳ Gerry & May Berth-Jones
- ↳ Harvey D. Torbett
- ↳ Ian Howcroft
- ↳ Izaak Walton
- ↳ Jack Hargreaves
- ↳ Jack Hilton
- ↳ J. H. R. Bazley
- ↳ J. W. Martin
- ↳ Kevin Clifford
- ↳ Len Arbery
- ↳ Maurice Ingham
- ↳ Mike Wilson
- ↳ Peter Stone
- ↳ Peter Thomas
- ↳ Rex Elgood
- ↳ Rod Hutchinson
- Places of Interest:
- ↳ Pools and Lakes
- ↳ Arlesey Lake
- ↳ Ashlea Pool
- ↳ Bearton Pond
- ↳ Bracken Lake
- ↳ Cheshunt Reservoir
- ↳ Croxby Pond
- ↳ Dagenham Lake
- ↳ Hunstrete Lake
- ↳ Mapperley Reservoir
- ↳ Redmire Pool
- ↳ Swancoote Pool
- ↳ Temple Pool
- ↳ Waggoners Wells
- ↳ Warren Pond
- ↳ Woldale
- ↳ Woodwater Pool
- ↳ Woodchester Lakes
- ↳ Wotton Underwood Lake
- ↳ Other Pools and Lakes
- ↳ The Rivers
- ↳ River Avon
- ↳ River Kennet
- ↳ River Lea
- ↳ River Loddon
- ↳ River Ouse
- ↳ River Roding
- ↳ River Severn
- ↳ River Teme
- ↳ River Test
- ↳ River Thames
- ↳ River Trent
- ↳ River Wensum
- ↳ River Wye
- ↳ Other Rivers
- ↳ The Canals
- ↳ Ashby Canal
- ↳ Coventry Canal
- ↳ Grand Union Canal
- ↳ Oxford Canal
- ↳ Stourbridge Canal
- ↳ Stratford-upon-Avon Canal
- ↳ Other Canals
- ↳ Haunted Swims and Fishing Stories
- ↳ Fishing Tackle, Game Fairs and Other Events
- Fish, Bait & Techniques:
- ↳ The Fish
- ↳ Barbel (Barbus barbus)
- ↳ Bream (Abramis brama)
- ↳ Carp (Cyprinus carpio)
- ↳ Chub (Leuciscus cephalus)
- ↳ Crucian (Carassius carassius)
- ↳ Dace (Leuciscus leuciscus)
- ↳ Eel (Anguilla anguilla)
- ↳ Grayling (Thymallus thymallus)
- ↳ Gudgeon (Gobio gobio)
- ↳ Perch (Perca fluviatilis)
- ↳ Pike (Esox lucius)
- ↳ Roach (Rutilus rutilus)
- ↳ Rudd (Scardinius erythrophthalmus)
- ↳ Salmon (Salmo salar)
- ↳ Tench (Tinca tinca)
- ↳ Trout (Salmo trutta)
- ↳ Zander (Stizostedion lucioperca)
- ↳ Traditional Fishing Bait
- ↳ Traditional Fishing Techniques
- ↳ Laying On
- ↳ Ledgering
- ↳ Lift Method
- ↳ Long Trotting
- ↳ Lure Fishing
- ↳ Margin Fishing
- ↳ Stret Pegging
- ↳ Surface Fishing
- ↳ Swing Tip
- ↳ Wallis Casting
- ↳ Other Traditional Float Fishing Techniques
- Fishing Books, Magazines, Anglers Guides & Films:
- ↳ Fishing Books and Magazines
- ↳ Fishing Films
- ↳ Pod Casts and Radio Recordings Etc
- ↳ Anglers Guides and Catalogues
- ↳ Allcocks Anglers Guides
- ↳ Allcocks Anglers Guides 1920's
- ↳ Allcocks Anglers Guides 1930's
- ↳ Allcocks Anglers Guides 1940's.
- ↳ Allcocks Anglers Guides 1950's.
- ↳ Allcocks Anglers Guides 1960's.
- ↳ Hardys Anglers Guides
- ↳ Hardy Anglers Guides 1800's
- ↳ Hardy Anglers Guides 1900's
- ↳ Hardy Anglers Guides 1910's
- ↳ Hardy Anglers Guides 1920's
- ↳ Hardy Anglers Guides 1930's
- ↳ Hardy Anglers Guides 1940's
- ↳ Hardy Anglers Guides 1950's
- ↳ Hardy Anglers Guides 1960's
- ↳ Other Anglers Guides And Catalogues
- ↳ Catalogues Held by Members
- Other Traditional Fishing Related Topics:
- ↳ Fly Tying
- ↳ General Fly Chat
- ↳ Traditional Angler's Clothing
- Traditional Fishing Tackle DIY:
- ↳ Traditional Reel Building and Restoring
- ↳ Making Other Items of Traditional Fishing Tackle
- The Market Place:
- ↳ Traditional Fishing Tackle Manufacturers
- ↳ Andrew Batchelor - Handmade Floats
- ↳ Andrew Betts - The Norfolk Float Company
- ↳ Andrew Field - The Lure of the Float
- ↳ Art of Angling - Paul Cook
- ↳ Dave Lewthwaite Centrepins
- ↳ Edward Barder
- ↳ Jason White of Dorset
- ↳ Rod Bags by Ellen Lawrence
- ↳ Traditional Fishing Tackle Shops, Past and Present