The Traditional Fisherman's Forum

Can anybody tell me the OD of the rubber button on a 12’ Marco Test please? I have one I bought to refurbish that is missing the alloy butt cap and the rubber button. I’m guessing it’s either 1.25” or 1.5”.

I’m actually in a bit of a dilemma with this rod. As I say, I bought it to refurbish but now I have it, it looks to be in pretty good condition overall, the only negative things being a gentle set in the tip section, the fact both male ferrules came off in my hand, dark varnish with one or two small patches where it had flaked off and the missing butt end. The male ferrules are odd, both seem to be drilled for pins but neither seems to have actually been pinned! I’ve not been able to check to see if the ferrules knock yet of course! I’m tempted to just repair the obvious faults, give it a gentle clean and fish it as it is, for now anyway. I’m slightly nervous about straightening the tip, and I’ll certainly be practicing on something else first, but the rest of it seems pretty straight forward, and it would put off having to do the half a million intermediates it has. It’s my first foray into cane and boy does it feel like a brute after so many years of using c****n, but it does also feel like it has soul, and I can’t help wondering what adventures it’s had!

Hi Hg., I have just measured mine at inch and a quarter.Black rubber button. My rod no 4263 reverse side of logo above the handle collar.I hope this is not a replacement by me or another but inch and a half would seem massive.Checked the ferrules and they are pinned! This is a powerful rod as its name suggests so I am not surprised you see it as a brute. My advice is to put it together and get on the bank you have all winter to refurbish it Regards Tony.

Sorry to add to the conundrum but ......
1 7/16" ish

Mine is slightly different...
Mine was refurbed a couple of years back so the button may not be standard

Thank you all for taking the time to provide an answer to a tyro. I guess I should have known that I wouldn’t get a definitive answer! I’d already looked at the two examples on InTheNetUK and they have different buttons on them, one is red and looks to be quite big, the other black and may be a little smaller.
Thinking practically, whatever I go with will have no effect on performance, it’s just a question of aesthetics and authenticity. Should I ever fail to catch on it - oh, the arrogance of that phrase - I shall of course blame it on having the wrong button, the fish clearly being of a very purist bent that day.

Hi Hg, This Bromley firm made a red rubber button with their name (MARCO) cast into the rear ,ie the base of the button. One up man ship if you could source one..... Tony

Tonkin Wand wrote: ↑Thu Oct 01, 2020 9:59 pm Hi Hg, This Bromley firm made a red rubber button with their name (MARCO) cast into the rear ,ie the base of the button. One up man ship if you could source one..... Tony

How about a black one with Marco. 1.5 “. HG if you send me your address by a PM you can have it as a pressy.

Well, well, well,.....Hg should be "over the moon" nice one Fredline. Tony (TW)

A great barbel rod.

Fredline wrote: ↑Fri Oct 02, 2020 9:49 am

Tonkin Wand wrote: ↑Thu Oct 01, 2020 9:59 pm Hi Hg, This Bromley firm made a red rubber button with their name (MARCO) cast into the rear ,ie the base of the button. One up man ship if you could source one..... Tony

How about a black one with Marco. 1.5 “. HG if you send me your address by a PM you can have it as a pressy.

Fredline, I would indeed be over the moon to have that! I’m almost speechless at such an incredibly generous offer. Thank you hardly seems adequate. PM coming your way very shortly.