I put in a cheap bid for this reel on ebay and surprisingly won it. It has a diameter of 4 1/2 inches, I think it's made from pressed steel and seems like it came from a budget range. It has a slight buckle which I may try to correct but otherwise a good cheap usable reel.
Does anybody have any more information please?
Thanks
Luke
ID help please.
- StalkingLuke
- Crucian Carp
- Posts: 975
- Joined: Wed Sep 07, 2011 9:17 am
- 12
- Location: Horsham, West Sussex
ID help please.
You do not have the required permissions to view the files attached to this post.
Never test the depth of the water with both feet.
- Nobby
- Wild Carp
- Posts: 10991
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: ID help please.
That's an Allcocks Black Knight, Luke. Its deep arbour making it popular for sea fishing as it holds so much line.
- StalkingLuke
- Crucian Carp
- Posts: 975
- Joined: Wed Sep 07, 2011 9:17 am
- 12
- Location: Horsham, West Sussex
Re: ID help please.
Many thanks Nobby, I did wonder with it being so deep. I'm going to pack it out with fly backing and then use it for carp and barbel, although quite a sturdy reel its surprisingly light.
Any idea when it may have been built?
thanks
Luke
Any idea when it may have been built?
thanks
Luke
Never test the depth of the water with both feet.
- Snape
- Bailiff
- Posts: 9984
- Joined: Sun Sep 04, 2011 11:52 am
- 12
- Location: North Oxfordshire
- Contact:
Re: ID help please.
There's no need to put backing on a centrepin as the line only ever comes off straight and if there is too much on there you will suffer from it bedding in when line is recovered under tension.stalkingluke wrote:Many thanks Nobby, I did wonder with it being so deep. I'm going to pack it out with fly backing and then use it for carp and barbel, although quite a sturdy reel its surprisingly light.
Any idea when it may have been built?
thanks
Luke
“Fishing is much more than fish. It is the great occasion when we may return to the fine simplicity of our forefathers,” Herbert Hoover.
`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º>
`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º>
- StalkingLuke
- Crucian Carp
- Posts: 975
- Joined: Wed Sep 07, 2011 9:17 am
- 12
- Location: Horsham, West Sussex
Re: ID help please.
Snape, if wound straight on to the small diameter will it not make the line coil a little? I've found this with fly lines on small reels in the past.
Never test the depth of the water with both feet.
- Nobby
- Wild Carp
- Posts: 10991
- Joined: Sun Oct 02, 2011 2:40 pm
- 12
- Location: S.W.Surrey
- Contact:
Re: ID help please.
True, this is the reason for the current trend for 'large arbor' ( American spelling) reels.
But Snape is right, a strong fish can easily give you line bedding...perhaps you could knock something up with cork? Either a spiral of sheet or perhaps a spice jar top, hollowed out and then cut in half, before being pinned and glued back together on the reel.
I did once see a reel 'filled' with thickish line, then a turn or two of tape before the mainline was wound on....I guess that would be the simplest route...and the quickest and cheapest.
But Snape is right, a strong fish can easily give you line bedding...perhaps you could knock something up with cork? Either a spiral of sheet or perhaps a spice jar top, hollowed out and then cut in half, before being pinned and glued back together on the reel.
I did once see a reel 'filled' with thickish line, then a turn or two of tape before the mainline was wound on....I guess that would be the simplest route...and the quickest and cheapest.
- Snape
- Bailiff
- Posts: 9984
- Joined: Sun Sep 04, 2011 11:52 am
- 12
- Location: North Oxfordshire
- Contact:
Re: ID help please.
I have 2 Aerials which have a depth of about 13-15mm which this reel looks like it also has. They each have 3 or 4 mm depth of line on them and I have never had any problems.Nobby wrote:True, this is the reason for the current trend for 'large arbor' ( American spelling) reels.
But Snape is right, a strong fish can easily give you line bedding...perhaps you could knock something up with cork? Either a spiral of sheet or perhaps a spice jar top, hollowed out and then cut in half, before being pinned and glued back together on the reel.
I did once see a reel 'filled' with thickish line, then a turn or two of tape before the mainline was wound on....I guess that would be the simplest route...and the quickest and cheapest.
I was thinking about Nobby's idea with the cork and thought about the cork flask rings I use in the lab which might be shaped to do the job like these
http://www.ebay.com/sch/i.html?_nkw=cor ... m270.l1313
“Fishing is much more than fish. It is the great occasion when we may return to the fine simplicity of our forefathers,” Herbert Hoover.
`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º>
`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º>
- StalkingLuke
- Crucian Carp
- Posts: 975
- Joined: Wed Sep 07, 2011 9:17 am
- 12
- Location: Horsham, West Sussex
Re: ID help please.
The depth is more like 30mm so quite a lot to build up so I will experiment with the various suggestions, thanks.
Unfortunately my two year old son has just dropped the reel so the small wobble is now larger, I will have to remedy this now as well.
Unfortunately my two year old son has just dropped the reel so the small wobble is now larger, I will have to remedy this now as well.
Never test the depth of the water with both feet.